Operation CHARM: Car repair manuals for everyone.
Home >> Chevy Truck >> 2006 >> SSR V8-6.0L VIN H >> Repair and Diagnosis >> Powertrain Management >> Tune-up and Engine Performance Checks >> Ignition Cable >> Service and Repair

Ignition Cable: Service and Repair



SPARK PLUG WIRE REPLACEMENT

REMOVAL PROCEDURE
1. Remove the engine sight shield.




2. Disconnect the spark plug wire at each spark plug.
- Twist each spark plug wire 1/2 turn.
- Pull only on the boot in order to remove the wire from each spark plug.
3. Disconnect the spark plug wire from the ignition coil.
- Twist each spark plug boot 1/2 turn.
- Pull only on the boot in order to remove the wires from the ignition coil.

INSTALLATION PROCEDURE




1. Install the spark plug wires at the ignition coil.
2. Install the spark plug wire to each spark plug.
3. Inspect the wires for proper installation:
- Push sideways on each boot in order to inspect the seating.
- Reinstall any loose boot.
4. Install the engine sight shield.
pro multis · About Operation CHARM