Retractor Anchor Plate Replacement

SEAT BELT RETRACTOR ANCHOR PLATE REPLACEMENT

REMOVAL PROCEDURE
1. Remove the seat belt.




2. Remove the seat belt retractor anchor plate fastener.
3. Remove the seat belt retractor anchor plate from the vehicle.

INSTALLATION PROCEDURE
1. Position the seat belt retractor anchor plate into the vehicle.




2. Tighten the seat belt retractor anchor plate.

Tighten the seat belt retractor anchor plate to 70 N.m (52 lb ft).

NOTE: Refer to Fastener Notice in Service Precautions.

3. Install the seat belt.