Filler Tube and Seal Replacement

Filler Tube and Seal Replacement

Removal Procedure
1. Remove the transmission oil level indicator.
2. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
3. Support the transmission using a suitable jack.
4. Remove the transmission mount nut.
5. Remove the transmission crossmember.





6. Loosen the catalytic converter. Refer to Catalytic Converter Replacement.





7. Lower the transmission slightly.





8. Remove the indicator tube nut.





9. Remove the oil level indicator tube.
10. Remove the seal from the transmission, if necessary.

Installation Procedure





1. Install a NEW seal to the indicator tube.
2. Install the oil level indicator tube.





3. Notice: Refer to Fastener Notice in Service Precautions.

Install the indicator tube nut.

Tighten the nut to 47 Nm (35 ft. lbs.).

4. Install the catalytic converter. Refer to Catalytic Converter Replacement.
5. Install the transmission crossmember.
6. Remove the support from the transmission.
7. Lower the vehicle.
8. Install the transmission oil level indicator.
9. Fill the transmission to the proper level with DEXRON III transmission fluid. Refer to Transmission Fluid Checking Procedure.