Turn Signal Switch: Service and Repair

Turn Signal Multifunction Switch Replacement

Removal Procedure

1. Remove the instrument panel cluster trim plate bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement (Service and Repair) .
2. Remove the lower steering column trim cover bolts and remove the upper steering column trim cover. Refer to Steering Column Trim Covers Replacement (Steering Column Trim Covers Replacement) .
3. Disconnect the turn signal multifunction switch electrical connectors.
4. Position the left lower steering column trim cover out of the way,




5. Depress the switch locking tabs and remove the turn signal multifunction switch (1).



Installation Procedure





1. Install the turn signal multifunction switch (1). Ensure the locking tabs are snapped into place.
2. Connect the turn signal multifunction switch electrical connectors.
3. Install the steering column trim covers. Refer to Steering Column Trim Covers Replacement (Steering Column Trim Covers Replacement) .
4. Install the instrument panel cluster trim plate bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement (Service and Repair) .