Part 5

113. Install the positive/negative battery cable terminal (2) to the stud.
114. Install the junction block terminal nut (1).

Tighten the nut to 15 Nm (11 lb ft).

115. Close the junction block terminal cover.




116. Connect the engine harness electrical connectors (1, 2) to the ECM.




117. Connect the body harness electrical connector (1) to the ECM.




118. Install the ECM/TCM cover.
119. Raise the vehicle.




120. Connect the cooling fan electrical connector.
121. Install the catalytic converter. Refer to Catalytic Converter Replacement (LE5, L61) (Service and Repair)Catalytic Converter Replacement (LNF) (Service and Repair).
122. Install the left side engine splash shield. Refer to Engine Splash Shield Replacement (Service and Repair).
123. Install the engine drive belt. Refer to Drive Belt Replacement (Service and Repair).
124. Install the windshield washer solvent reservoir. Refer to Windshield Washer Solvent Container Replacement (Service and Repair).




125. Connect the EVAP line to the EVAP purge solenoid. Refer to Plastic Collar Quick Connect Fitting Service (Plastic Collar Quick Connect Fitting Service).




126. Connect the fuel feed line to the fuel rail. Refer to Metal Collar Quick Connect Fitting Service (Metal Collar Quick Connect Fitting Service).
127. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (Service and Repair).
128. Perform the engine prelubing procedure. Refer to Engine Prelubing (Overhaul).
129. Fill the cooling system. Refer to Cooling System Draining and Filling (Static Fill-LE5, L61) (Service and Repair)Cooling System Draining and Filling (Static Fill-LNF) (Service and Repair)Cooling System Draining and Filling (GE 47716 Fill) (Service and Repair).
130. Check the automatic transaxle fluid, if equipped, add as needed. Refer to Transmission Fluid Check (Testing and Inspection).
131. Check the manual transaxle fluid, if equipped, add as needed. Refer to Transmission Fluid Check (Transmission Fluid Check).
132. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement (Service and Repair).
133. Close the hood.
134. Check the front alignment. Refer to Wheel Alignment Measurement (Service and Repair).