Battery Current Sensor: Service and Repair

Battery Current Sensor Replacement

Removal Procedure




1. Remove the negative battery cable. Refer to Battery Negative Cable Replacement (Battery Negative Cable Replacement).
2. Remove the tape securing the battery current sensor to the negative battery cable.




3. Remove the battery current sensor from the negative battery cable.

Installation Procedure




1. Install the battery current sensor by passing the ground end of the negative battery cable through the sensor.





Important: Ensure the battery current sensor is installed in the previous location on the negative battery cable.


2. Fasten the battery current sensor with electrical tape to the negative battery cable.
3. Install the negative battery cable to the battery. Refer to Battery Negative Cable Replacement (Battery Negative Cable Replacement).