101. Valve Lifter Oil Manifold Installation

Valve Lifter Oil Manifold Installation




1. Do not lift the manifold assembly by the electrical lead frame.





Note:
* All gasket surfaces should be free of oil or other foreign material during assembly.
* Do not allow dirt or debris to enter the manifold. Plug, as required.

2. Install the service gasket (556) onto the manifold.




3. Install the manifold (451) with gasket.

Caution: Refer to Fastener Caution (Fastener Caution).

4. Install the manifold bolts (506) and tighten to 25 Nm (18 lb ft).