Power Take-Off Cover Gasket Replacement

Power Take-Off Cover Gasket Replacement

Removal Procedure




1. Remove 6 bolts (3).
2. Remove the power take-off (PTO) cover (2) and gasket (1). Discard the used gasket.
3. Ensure the PTO gasket face on the transmission case is free of all foreign material, nicks, and scratches.

Installation Procedure




1. Install the new PTO cover gasket (1) and cover (2).

Caution: Refer to Fastener Caution (Fastener Caution).

2. Start the top-center bolt (3) first. Install the other 5 bolts.

Tighten all bolts to 43 Nm (32 lb ft).