Engine Ground Strap Replacement

Engine Ground Strap Replacement (V6)

Removal Procedure




1. Remove the ground strap bolt from the rear of the left cylinder head.
2. Reposition the ground strap from the cylinder head.




3. Remove the ground strap nut from the stud at the front of dash.
4. Remove the ground strap from the stud.

Installation Procedure




1. Install the ground strap to the stud.

Caution: Refer to Fastener Caution Fastener Caution.

2. Install the ground strap nut to the stud at the front of dash and tighten to 9 Nm (80 lb in).




3. Position the ground strap to the rear of the left cylinder head.
4. Install the ground strap bolt and tighten to 16 Nm (12 lb ft).