Kelsey-Hayes Double Pin Caliper

For additional information see Removal Notes. Fundamentals and Basics

Fig. 1 Kelsey-Hayes Dual Pin Floating Caliper Disc Brake Assembly:

Fig 2 Disc Brake Caliper:

NOTE: If a shoe and lining does not require replacement, reinstall, making sure each shoe is returned to the original position.

1. Raise vehicle on jackstands or centered on a hoist.
2. Remove front wheel and tire assemblies.
3. Remove caliper to knuckle attaching bolts.

Fig 3 Removing Caliper And Brake Shoes As An Assembly:

4. Pull lower end of the caliper out from the machined abutment on the steering knuckle and roll caliper out and away from braking disc. The shoe assemblies will remain with the caliper.

Fig 4 Prying Outboard Shoe Assembly Away From Caliper:

5. Remove outboard shoe by prying between shoe and caliper.

Fig 5 Removing Or Installing Inboard Shoe Assembly:

6. Remove the inboard shoe from the assembly by pulling the shoe and lining assembly away from the piston.