MST-6100 ABS System Tester

The MST-6100 tester will provide and receive information to and from the Anti-lock Brake Control Module (ABCM) when required.

The MST-6100 Anti-lock Brake System (ABS) Tester consists of two distinct test units housed in the same case. A single cable is provided to be hooked up to either the PINOUT Box portion or the Vehicle System Tester portion of the tool.

The MST-6100 ABS Tester is designed to perform checks only on the Bosch ABS-3 System and is not to be used on other ABS systems. The unit receives battery voltage from the vehicle harness and requires no other source of power. The unit consists of a single test harness and a dual purpose test box. A 3 amp slow-blow fuse is provided on the left side of the tester panel.

For testing procedures using the MST-6100 ABS Tester, see MST-6100 ABS SYSTEM TESTER AND TEST STEPS.

For special information regarding disengaging/engaging test connectors, see CONNECTOR SERVICE PROCEDURES.