Front Door: Service and Repair

REMOVAL
1. Roll door glass down.
2. Slide outer door belt molding forward until retaining tab on applique is visible.
3. Disengage clip holding top of window frame weatherstrip to upper door frame.
4. Remove window frame weatherstrip as necessary to clear removal path for applique.
5. Disengage clips holding front edge of applique to window frame.

Front Door Applique:

6. Separate applique from vehicle.

INSTALLATION
1. Place applique in position on vehicle.
2. Hook rear edge of applique over window frame.
3. Engage clips to hold front edge of applique to window frame.
4. Install window frame weatherstrip.
5. Engage clip to hold top of window frame weatherstrip to upper door frame.
6. Slide outer door belt molding rearward into position.