Backup Lamp

During the week of June 5, 1995, a running change was made to St. Louis built vehicles equipped with 41TE transaxles that incorporated a Transaxle Range Sensor (TRS).

Prior to that time, the 4 speed electronic automatic transaxle (EATX) used a back up lamp relay (located in the power distribution center).

Transmission Control System:

With the incorporation of the TRS, the back up lamp relay is no longer used, for additional information, refer to Transaxle Range Sensor Description and Operation, Transmission Position Sensor/Switch

This article has been updated by technical service bulletin 211495 Dated Sep. 1, 1995.