Using Scan Tool

Fig. 17 Diagnostic Link Connector:

USING SCAN TOOL
On 1996 models, connect a suitable scan tool to the Diagnostic Link Connector (DLC) located under the LH side of instrument panel, then follow scan tool manufacturer's instructions to access the DTCs.

Refer to test procedures, to locate failed component or perform recommended repair.

Using Scan Tool

Fig. 17 Diagnostic Link Connector:

Fig. 22 Test TC-14A: Radiator Fan Control Relay Circuit (Part 1 Of 3):

Fig. 22 Test TC-14A: Radiator Fan Control Relay Circuit (Part 2 Of 3):

Fig. 22 Test TC-14A: Radiator Fan Control Relay Circuit (Part 3 Of 3):