Stabilizer Bar (Rear)

DESCRIPTION






The stabilizer bar interconnects both sides of the rear axle and attaches to the rear frame rails using 2 rubber isolated link arms.

Attachment to the rear axle tube, and rear frame rails is through rubber-isolated bushings. All parts are serviceable, and the stabilizer bar to axle bushings are split for easy removal and installation. The split in the bushing should be positioned up when the stabilizer bar is installed on the vehicle.

The 2 rubber isolated link arms are connected to the rear frame rails by brackets. These brackets are bolted to the bottom of the frame rails.

OPERATION
Jounce and rebound movements affecting one wheel are partially transmitted to the opposite wheel to reduce body roll.