Removal and Replacement

CLUSTER BEZEL

REMOVAL

1. Disconnect and isolate the battery negative cable.
2. Remove Over Steering Column Bezel by lifting it straight up with a firm pull.
3. Remove the four bezel attaching screws.
4. Tilt the steering column in the full down position.
5. Pull rearward on the cluster bezel and remove.

INSTALLATION

1. Maneuver cluster bezel over steering column and into position.
2. Install the four bezel attaching screws.
3. Install the Over Steering Column Bezel by positioning it over the retaining slots and firmly snapping it into place.
4. Connect the battery negative cable.