Headlamp High Beam Replacement

REMOVAL
1. Release hood latch and open hood.
2. From behind radiator closure panel, disconnect wire connector from back of high headlamp bulb base.

Headlamp High Beam Bulb:

3. Rotate headlamp bulb counterclockwise and pull bulb from back of headlamp module.

INSTALLATION

CAUTION: Do not touch the glass of halogen bulbs with fingers or other possibly oily surface, reduced bulb life will result.

1. Insert bulb into the back of the headlamp module.
2. Rotate headlamp bulb clockwise to engage bulb.
3. Connect wire connector to the low beam headlamp. Verify headlamp bulb operation
4. Verify headlamp alignment.