Rear Clutch

DISASSEMBLY








1. Remove rear clutch snap ring (Fig. 126) (Fig. 132)





2. Remove rear clutch pack (Fig. 127).





3. Remove piston/belleville snap ring (Fig. 128).





4. Remove rear clutch piston and belleville spring (Fig. 129).








Remove input shaft-to-clutch retainer snap ring (Fig. 130) (Fig. 131). Press input shaft out of retainer if necessary.

ASSEMBLY











1. Install input shaft-to-clutch retainer snap ring (Fig. 133) (Fig. 134) (Fig. 132).








2. Install rear clutch piston, belleville spring and waved snap ring (Fig. 135). Install snap ring using a suitable screwdriver (Fig. 136).





3. Install rear clutch pack (Fig. 137).





4. Install snap ring using a suitable screwdriver (Fig. 138).





5. Using feeler gauges, measure rear clutch clearance (Fig. 139). Rear clutch clearance should be within 0.71 - 1.10 mm (0.028 - 0.043 inch).