No Response From Airbag Control Module

Tests 1 - 2:

Tests 3 - 8:

Tests 9 - 10:

SYMPTOM
NO RESPONSE FROM ACM

TEST NOTE
This symptom is diagnosed using the test AIRBAG MESSAGE NOT RECEIVED.

WHEN MONITORED:
Continuously with ignition ON.

SET CONDITION:
If this message is not received by the BCM for more than 18 seconds, this code will be set. This trouble code is stored in memory for 20 key cycles after the problem is repaired if it is not erased after repair.

POSSIBLE CAUSES
- Airbag system problem
- ACM ground circuit open
- CCD bus (+) circuit open
- CCD bus (-) circuit open
- Fuse # 13 open
- Ignition switch output circuit open
- Fused ignition switch circuit shorted to ground
- Fused ignition switch output circuit open
- Fused ignition switch circuit shorted to ground at ACM