Loss of Ignition Run Only (Active)

Tests 1 - 3:

Tests 4 - 6:

Test 7:

SYMPTOM
LOSS OF IGNITION RUN ONLY (ACTIVE)

WHEN MONITORED:
Continuously with ignition ON.

SET CONDITION:
The "Loss of Ignition Run Only" code will set if the voltage on the Fused Ignition Switch Output Run Only circuit falls below 6.0 volts.

POSSIBLE CAUSES
- Ignition switch output circuit open
- Fused ignition switch output circuit shorted to ground
- Fused ignition switch output circuit open
- Ignition switch output (run only) fuse defective
- ACM defective, fused ignition run only shorted
- ACM defective, fused ignition run only open