Loss of Ignition Run/Start (Active)

Tests 1 - 3:

Tests 4 - 7:

SYMPTOM
LOSS OF IGNITION RUN/START (ACTIVE)

WHEN MONITORED:
Continuously with ignition ON.

SET CONDITION:
The "Loss of Ignition Run/Start" code will set if the voltage on the Fused Ignition Switch Output Run/Start circuit falls below 6.0 volts.

POSSIBLE CAUSES
- Ignition switch output Run/Start open
- Fused (Run/Start) defective
- Fused ignition switch output Run/Start open
- ACM defective, fused ignition Run/Start open
- ACM defective, fused ignition Run/Start shorted