Operation CHARM: Car repair manuals for everyone.

Loss of Ignition Run/Start Only (Stored)

Test 1:




SYMPTOM
LOSS OF IGNITION RUN/START (STORED)

TEST NOTE
This symptom is diagnosed using the test DRIVER SQUIB CIRCUIT OPEN (STORED).

WHEN MONITORED:
Continuously with ignition ON.

SET CONDITION:
The "Loss of Ignition Run/Start" code will set if the voltage on the Fused Ignition Switch Output Run/Start circuit falls below 6.0 volts.

POSSIBLE CAUSES
- Stored code has become active
- Stored code has not been reproduced