Convenience Bin Lamp Replacement (2)

Unused Convenience Bin Lamp Socket Location:

If the lamp is not used, refer to above image.

REMOVAL
1. Pull out the convenience bin cup holder.
2. Insert the trim stick between access cover above cup holder and center console.

Convenience Bin Access Cover:

3. Carefully pry the access cover from the center console.
4. Remove the access cover from the vehicle.
5. Using needle-nose pliers, carefully squeeze the vertical metal legs of the lamp hood.
6. Lift the lamp hood upward from the cup holder tray.

Convenience Bin Lamp Bulb:

7. Carefully pull the lamp and wiring rearward from the instrument panel.
8. Pull the lamp hood from the lamp socket.
9. Pull bulb from socket.

INSTALLATION
1. Install bulb into socket.
2. Install the lamp hood onto the lamp socket.
3. Carefully install the lamp and wiring to the instrument panel.
4. Place the lamp hood downward onto the cup holder tray.
5. Ensure the vertical metal legs of the lamp hood set in position.
6. Install the access cover into position.
7. Push in the convenience bin cup holder.