Cruise Control Servo: Service and Repair

REMOVAL
1. Release hood latch and open hood.

Speed Control Cable End:

2. Disconnect the throttle and speed control cable ends from throttle body.

Speed Control Cable Case and Vacuum Line-Typical:

3. Depress lock tabs holding speed control cable casing to cable mount bracket.
4. Disconnect vacuum line from nipple on air intake plenum.
5. Remove tie wrap holding vacuum line, throttle cable, and speed control cable together.

Speed Control Servo:

6. Remove bolt holding speed control servo to side of battery tray/vacuum reservoir.
7. Remove speed control servo from battery tray.
8. Disconnect wire connector from speed control servo.
9. Disconnect vacuum line from speed control servo that leads to the battery tray/vacuum reservoir.
10. Remove speed control servo.

INSTALLATION
Transfer speed control cable to replacement speed control servo.
1. Install speed control servo.
2. Connect vacuum line to speed control servo that leads to the battery tray/vacuum reservoir.
3. Connect wire connector to speed control servo.
4. Install speed control servo to battery tray.
5. Install bolt holding speed control servo to side of battery tray/vacuum reservoir.
6. Install tie wrap holding vacuum line, throttle cable, and speed control cable together.
7. Connect vacuum line from nipple on air intake plenum.
8. Install speed control cable casing to cable mount bracket.
9. Connect the throttle and speed control cable ends from throttle body.
10. Install air cleaner resonator.