Air Outlet Louvers

All the air outlet louvers are of the barrel type and should be removed the same as the Passenger Louvers keeping in mind that the flat blade is being installed at the louver pivot.

REMOVAL

Removing Louver-Typical:

1. Using a medium flat blade tool, position it in between the right side of louver and the housing.
2. Twist the tool to release the pivot pin from the louver and pull outward till released from pin.
3. Place the flat blade tool on the other side of louver and release the other pivot pin and pull louver free from the instrument panel. Use the same procedure for any of the instrument panel air outlet louvers.

INSTALLATION
For installation, reverse the above procedures.