Dome Lamp Replacement

REMOVAL
1. Insert a small, flat bladed pry tool between dome lamp lens and dome lamp body on left side of dome lamp.

Dome Lamp Lens:

2. Disengage left side of dome lamp lens from lamp body.
3. Pivot dome lamp lens downward until lens hook is clear of headlining.

Dome Lamp Hook:

4. Slide dome lamp toward right side of vehicle until hook on dome lamp is clear of headlining.
5. Remove dome lamp from headlining.
6. Disconnect wire connector from dome lamp.
7. Remove dome lamp from vehicle.

INSTALLATION
1. Position dome lamp in vehicle.
2. Connect wire connector to dome lamp.
3 . Position dome lamp to headlining.
4. Position hook on dome lamp above headlining and slide lamp toward left side of vehicle until hook on dome lamp is fully engaged to headlining.
5. Push upward on dome lamp until dome lamp is tight to headlining.
6. Pivot dome lamp lens upward. Verify that lamp lens hook is above the headlining.
7. Install left side of dome lamp lens to lamp body.