Reading / Courtesy Lamp Assembly Replacement

REMOVAL

Negative Battery Cable:

1. Disconnect and isolate the battery negative cable.
2. Remove the overhead console. Refer to Overhead Console Removal and Installation.

Reading / Courtesy Lamp:

3. Remove the screws holding the reading lamp to the overhead console.
4. Remove the lamp from the overhead console.

Connector And Switch:

5. Disconnect the wire connectors from the back of the reading lamp.
6. Disconnect the reading lamp switch from the keyhole slot in the reading lamp.
7. Remove the reading lamp from the overhead console.

INSTALLATION
1. For installation, reverse the above procedures.