Rear Air Conditioning Lines Replacement

WARNING: THE REFRIGERATION SYSTEM MUST BE COMPLETELY EMPTY BEFORE PROCEEDING WITH THIS OPERATION.

REMOVAL
1. Hoist vehicle

Front Lines Connected to Rear Lines:

2. Remove compression fittings to the suction and liquid lines located on the right, outboard side of the underbody, rearward of the front crossmember.

Rear A/C Block Connection:

3. remove (1) bolt securing a/c lines to block located on the right, outboard side of the underbody, rearward of the rear wheel and tire.

Rear Heater and A/C Lines:

4. Remove (3) straps securing underbody lines.
5. Separate and remove a/c lines from vehicle.

INSTALLATION
1. Before installation, replace all O-rings and gaskets. Coat all sealing surfaces with approved wax- free refrigerant oil. Then, reverse the above procedures.
2. Evacuate and recharge system