Center Mounted Brake Lamp: Service and Repair

REMOVAL
1. Release liftgate latch and open liftgate.
2. Disengage clips holding CHMSL access cover to liftgate.
3. Remove cover from liftgate.
4. Rotate bulb sockets counterclockwise one quarter turn.
5. Pull sockets from lamp.
6. Remove screws holding CHMSL to liftgate.

CHMSL:

7. Remove CHMSL from vehicle.

INSTALLATION
1. Place CHMSL in position on vehicle.
2. Install screws to hold CHMSL to liftgate.
3. Insert bulb into socket.
4. Insert sockets into lamp.
5. Rotate bulb sockets clockwise one quarter turn.
6. Place CHMSL access cover in position on liftgate.
7. Engage clips to hold access cover to liftgate.
8. Verify CHMSL operation.