A/C Discharge Hose/Line Replacement

REMOVAL
1. Recover A/C system refrigerant.

Compressor Discharge Line:

2. Remove discharge line mounting nut at compressor.

Condenser Discharge Line:

3. Remove discharge line at the top fitting on the condenser.

INSTALLATION
1. For installation, reverse the above procedures. Replace all O-rings. Torque discharge line at condenser bolt to 180 in. lbs. ± 10.
2. Evacuate and recharge A/C system.
3. Perform the HVAC Control Calibration Diagnostic and Cooldown test.