Lower Drive Unit Track & Rack Replacement

REMOVAL
1. Disconnect and isolate the negative battery cable.
2. Remove the side door sill plate from the lower of the door opening. Refer to the Body for the procedure.
3. Remove the hold-open striker. Refer to Body for the procedure.

Fig.15 Supporting Side Door:

4. Position a floor jack, with a block of wood under the leading edge of the side door to support it.
5. Remove the lower drive unit. Refer to the procedure.

Fig.13 Access Hole Locations:

6. Position the wire harness assembly out of door opening, this will allow the door track to be removed easily.

Fig.14 Lower Track Retaining Bolts:

7. Pull back sealing patchesand remove the lower track retaining nuts.
8. Carefully remove the lower door track from the vehicle.

INSTALLATION
1. Carefully position the lower door track in the vehicle.
2. Install the lower track retaining nuts and install the sealing patches. Torque the fasteners to 70 in. lbs..
3. Install the lower drive unit. Refer to the procedure.
4. Remove the floor jack.
5. Install the hold-open striker. Refer to the Body for the procedure.
6. Install the side door sill plate on the lower of the door opening. Refer to the Body for the procedure.
7. Connect the negative battery cable.