Seat Back Cover / Foam - Third Row

SEAT BACK COVER / FOAM -THIRD ROW - STOW - N - GO

REMOVAL

NOTE: On all leather trimmed seats, back cover can be removed from the back foam pad. On cloth trimmed seats, the back cover does not separate from the foam pad.

1. Remove seat back assembly.
2. Remove headrest sleeve.
3. Using special tool C-4755, remove the pull strap bezel.
4. Unzip the trim cover sides.
5. Open up the trim cover lower closeout.
6. Roll over the cover and pad and pull to the top of the frame.

INSTALLATION

NOTE: On all leather trimmed seats, back cover can be removed from the back foam pad. On cloth trimmed seats, the back cover does not separate from the foam pad.

1. Locate stow strap underneath pad/cover and pull the end of the strap through the slit of the pad-cover.
2. Invert cover and install pad on to the back frame.
3. Close up the trim cover lower closeout.
4. Slide the stow and go strap through the bezel. Push bezel onto the back frame slot underneath the cover.