Chime/Thermistor Replacement

REMOVAL
1. Disconnect and isolate the negative battery cable.
2. Remove the rear light bar assembly from the vehicle. Refer to Body for the procedure.
3. Using your hands, grasp the light bar at its sides next to thermistor/chime assembly and gently pull the two sides of the light bar apart until the thermistor/chime assembly can be removed.

INSTALLATION
1. Gently pull the two sides of the light bar apart until the thermistor/chime assembly can be installed.
2. Install the rear light bar assembly on the vehicle. Refer to the Body for the procedure.
3. Connect the negative battery cable.