Mode Overcurrent (Stored)

Test 1:

SYMPTOM
MODE OVERCURRENT (STORED) - MANUAL A/C

TEST NOTE
This symptom is diagnosed using the test A/C FAULT (STORED) - MANUAL A/C.

WHEN MONITORED
When actuator movement is requested.

SET CONDITION
All (Blend, Mode, Recirc, and Zone) Overcurrent DTCs will set if the A/C - Heater Control Module detects an excessive current draw on the Common Door Drive circuit(s).

POSSIBLE CAUSES
- Code(s) become(s) active
- Stored code(s) test complete