Incomplete Power Open - Overcurrent

Tests 1 - 2:

Tests 3 - 7:

SYMPTOM
INCOMPLETE POWER OPEN - OVERCURRENT

WHEN MONITORED
Anytime the Power Sliding Door is in a power open operation.

SET CONDITION:
The drive motor stall current of over 16 amps has been detected for over 500 ms. during an open operation.

POSSIBLE CAUSES
- DTC present
- Power sliding door motor/clutch
- Binding door
- Ground circuit open
- Cinch/release motor latch driver circuit open
- Cinch/release motor latch driver circuit short to ground
- Door motor clutch driver circuit short to ground