Incomplete Power Open - Overcurrent

Tests 1 - 2:

Tests 3 - 7:

Tests 8 - 9:

SYMPTOM
INCOMPLETE POWER OPEN - OVERCURRENT

WHEN MONITORED
Anytime the Power Liftgate is in a power open operation.

SET CONDITION
The drive motor stall current of over 24 amps has been detected for over 500 ms. during an open operation.

POSSIBLE CAUSES
- DTC present
- Liftgate cinch/release motor
- Binding liftgate
- Ground circuit open
- Liftgate latch cinch driver circuit open
- Liftgate latch cinch driver circuit short to ground
- Liftgate latch cinch driver circuit short to harness ground
- Liftgate gear engage driver circuit short to ground
- Liftgate gear engage driver circuit short to harness ground