ORC Loss of Ignition Run/Start (Active)

Tests 1 - 2:

Tests 3 - 6:

Test 7:

SYMPTOM
ORC, LOSS OF IGNITION RUN-START - ACTIVE

TEST NOTE
This symptom is diagnosed using the test FCM, ORC RUN-START DRIVER OPEN - ACTIVE.

WHEN MONITORED
With the ignition in the Run-Start position the ORC monitors the ORC Run-Start Driver circuit for proper system voltage.

SET CONDITION
If the voltage on the ORC Run-Start Driver circuit drops below 4.5 volts, the code will set.

POSSIBLE CAUSES
- Verifying ORC run-start driver codes
- Check battery voltage
- FCM, run-start driver over voltage
- ORC, run-start test
- FCM, run only open test
- IPM, run only open test
- ORC run only driver circuit open
- FCM, run-start short test
- IPM, run-start short test
- ORC run-start driver circuit short