C-Pillar Trim
C - PILLAR TRIMREMOVAL
1. Remove quarter trim panel.
2. Remove seat belt turning loop from height adjuster.
Fig. 14:
3. Remove screw attaching C-pillar trim panel to C-pillar (Fig. 14).
4. Disengage hidden clips attaching trim to upper C-pillar.
5. Remove upper C-pillar trim from vehicle.
INSTALLATION
1. Place upper C-pillar trim in position on vehicle (Fig. 14).
2. Engage hidden clips attaching trim to upper C-pillar.
3. Install screw attaching C-pillar trim panel to C-pillar.
4. Install seat belt turning loop onto height adjuster. Tighten all seat belt bolts to 39 N.m (29 ft.lbs.) torque.
5. Install quarter trim panel.