Quad Seat Cushion

QUAD SEAT CUSHION

REMOVAL

1. Remove the quad bucket seat side shields and cup holder.
2. Remove seat track front and rear covers if equipped.
3. If equipped, open storage bin to access front pan bolts.
4. Remove bolts attaching seat cushion pan to seat riser.
5. Disconnect wire connectors, if equipment.
6. Remove seat cushion from seat.
7. Disengage J-strap retainers holding seat cover to cushion.
8. Remove seat cushion pan from cover and pad.

INSTALLATION

1. Place seat cushion cover in position on seat cushion.
2. Engage J-strap retainers to hold seat cover to cushion.
3. Place seat cushion in position on seat.
4. Connect wire connectors, if equipment.
5. Install bolts attaching seat cushion to seat riser. Tighten bolts to 40 N.m (29.5 ft.lbs.) torque.
6. If equipped, close storage bin.
7. Install seat track front and rear covers, if equipped.
8. Install the quad seat side shield and cup holder if equipped.
9. Install seat cushion side covers.