Instrument Panel Top Cover

INSTRUMENT PANEL TOP COVER

REMOVAL
1. Remove A-pillar trim. Using a trim stick (special tool #C-4755) or equivalent, gently pry out and remove.
2. Using a trim stick, disengage clips holding rear edge of top cover to instrument panel.


NOTE: The Instrument Panel Top Cover may be hard to unsnap from the instrument panel. Be sure not to mar, scuff, or damage the instrument panel pad.


3. Pull top cover rearward to disengage hooks holding front of top cover to instrument panel.
4. Remove top cover from vehicle.


INSTALLATION
1. Place instrument panel top cover in position on vehicle.
2. Push top cover forward to engage hooks to hold front of top cover to instrument panel.
3. Engage clips to hold rear edge of top cover to instrument panel.
4. Pull top cover rearward.
5. Install A-pillar trim.