Throttle Cable/Linkage

Throttle Cable Bracket Plastic Manifold 5.7 Nm (50 In. Lbs.).
Throttle Cable Bracket Aluminum Manifold 11.9 Nm (105 In. Lbs.).

The composite manifolds uses special Plastic screws. The factory installed Plastic screws can be removed and installed up to 5 times. Do not exceed the specified torque. These screws must be installed slowly (less than 600 rpms) to avoid melting the parent material. There are service repair screws available for repair. They require a higher torque than the original screws..