Headrest Sleeve

HEADREST SLEEVE

REMOVAL

1. Remove head restraint.
2. Remove back panel.
3. Reach up under back frame back plate.

Fig. 10:

4. Pinch retainer barbs on end of head restraint sleeve together (Fig. 10).

Fig. 11:

5. Pull head restraint sleeve upward and out the top of the seat back frame guide tube (Fig. 11).

INSTALLATION

1. Insert head restraint sleeve into guide tube at top of trimmed seat back.
2. Push head restraint sleeve downward until retainer clicks into lock position.
3. Install seat back panel.
4. Install head restraint.