Seat Riser Latch Locking Link

SEAT RISER LATCH LOCKING LINK

REMOVAL

1. Remove seat as necessary to access latch locking link.

NOTE: If the seat is locked in the seated position and cannot be tilted forward, it can be released by reaching into the escutcheons with a hook tool or a finger from the rear. Pulling the latch toward the rear of the vehicle will unlock the seat latch allowing the seat to tilt forward.

Fig. 102:

2. Using a flat bladed tool pry plastic latch locking link free from both pins (Fig. 102).
3. Remove link from seat.

INSTALLATION

1. Place latch locking link into position (Fig. 102).
2. Press latch locking link onto pins lock and seat fully.
3. Place seat into position and verify proper operation.