Diagnostic Mode

DIAGNOSTIC MODE
On a Mark 20 system to enter a diagnostic mode, vehicle speed must be below 10 km/h (6 mph) and no ABS condition present. If vehicle speed is not below 10 km/h (6 mph), a "no response" message could be displayed DRB III . The following are characteristics of diagnostic mode:

- The amber ABS and red brake warning indicator will blink rapidly (about 1/2 second on and 1/2 second off). If a hard trouble code is present, such as CAB Power Feed Circuit, the indicator will be illuminated without blinking until the diagnostic trouble condition is corrected.

- Antilock operation is disabled.