Side Repeater Lamp Unit - Export Replacement

Fig. 35 Side Repeater Lamp:

REMOVAL
1. Remove the appropriate front wheel well splash shield retaining screws. Reaching through wheel well, depress side repeater lamp retaining tabs and release from front fender (Fig. 35).
2. Pull side repeater lamp out and disengage bulb socket from lamp.

INSTALLATION
1. Push side repeater lamp socket into side repeater lamp.
2. Position side repeater lamp to hole in fender.
3. Push side repeater lamp to one side and seat retaining tab into fender.
4. Verify lamp operation.