Power Foldaway Mirror Switch Test - RHD
POWER FOLDAWAY MIRROR SWITCH TEST - RHDThe following test is designed to be used only on vehicles equipped with power fold-away side view mirrors.
1. Remove power mirror switch from mounting position.
Fig.2 Power Fold-Away Mirror Switch:
2. Using an ohmmeter, test for continuity between the terminals of the switch as shown in the tables above.
NOTE: When testing using the charts below, be certain to read the chart correctly. Example: When testing left mirror "DOWN", pins 1, 9,10 will show continuity to each other but not with 3, 4, 5.
3. If test results are not obtained as shown in the tables shown, replace the switch.
Extended Mirror Switch Circuit Test:
NOTE: Mirror position switch must be in the "EXTENDED" position to use chart.
Retracted Mirror Switch Circuit Test:
NOTE: Mirror position switch must be in the "RETRACTED" position to use chart.