System Faults

SYSTEM FAULTS
There are two conditions, which will cause a Tire Pressure Monitoring System fault to be set. All fault codes are associated with a specific wheel location.
1. If the EVIC detects a non-transmitting Sensor/ Transmitter condition, it will:
a. Store an active fault code.
b. Request a chime
c. Display "SERVICE TIRE PRESS. SYSTEM"
2. When the EVIC receives a Low Sensor/Transmitter battery report from a Sensor/ Transmitter, it will
a. Store an active fault code.
b. Request a chime.
c. Display "SERVICE TIRE PRESS. SYSTEM".
Use the DRBIII Inputs/Outputs function to further isolate the specific concern. The DRBIII can be queried to determine the status and battery condition for each Sensor/Transmitter.