Passenger Heated Seat Switch Replacement

REMOVAL

WARNING: ON VEHICLES EQUIPPED WITH AIRBAGS, REFER TO THE RESTRAINTS SECTION OF THIS MANUAL BEFORE ATTEMPTING ANY STEERING WHEEL, STEERING COLUMN, SEAT OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE. FAILURE TO TAKE THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE PERSONAL INJURY.

1. Disconnect and isolate the battery negative cable.
2. Remove the instrument panel center bezel. Refer to Instrument Panel Center Bezel in the Body section for the procedure.

Fig.4 Switch Retaining Screws:

3. Remove the three screws that secure the heated seat switch to the back of the instrument panel center bezel.
4. Remove the heated seat switch from the back of the instrument panel center bezel.

INSTALLATION
1. Position the heated seat switch onto the back of the instrument panel center bezel.
2. Install and tighten the three screws that secure the heated seat switch to the back of the instrument panel center bezel. Tighten the screws to 1.5 Nm (13 in. lbs.).
3. Install the center bezel onto the instrument panel. Refer to Instrument Panel Center Bezel in the Body section for the procedure.
4. Reconnect the battery negative cable.