Seat Back Hinge Covers - Quad Bucket, 50 / 50 Split, Bench Flat Floor

SEAT BACK HINGE COVERS -QUAD BUCKET, 50 / 50 SPLIT, BENCH FLAT FLOOR

REMOVAL

1. Remove seat from vehicle.

Fig. 91:

2. Remove screws attaching upper hinge cover to seat back hinge (Fig. 91).
3. Remove upper cover from seat back hinge.
4. Remove screws attaching lower cover to seat back hinge.
5. Remove lower cover from hinge.

INSTALLATION

1. Place lower cover in position on hinge.
2. Install screws attaching lower cover to seat back hinge (Fig. 91). Tighten screws to 2.3 N.m (20 in.lbs.) torque.
3. Place upper cover in position on seat back hinge.
4. Install screws attaching upper hinge cover to seat back hinge. Tighten screws to 2.3 N.m (20 in.lbs.) torque.
5. Install seat in vehicle.