Headlamp Replacement

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove headlamp unit retaining screws.
3. Remove headlamp unit to expose back of unit.
4. Remove wiring connector from bulb.
5. Rotate headlamp bulb retaining ring counterclockwise.

Fig.12 Headlamp:

6. Pull headlamp bulb and remove from headlamp unit.

INSTALLATION
1. Install headlamp bulb to the headlamp unit.
2. Install headlamp bulb retaining ring.
3. Connect wiring connector to bulb.
4. Install the headlamp unit.
5. Install headlamp unit retaining screws.
6. Reconnect the battery negative cable.